free counter

How exactly to bend a solid wall


A curved feature on your own brick building will set the structure aside from others. These unique characteristics put in a sense of creativity and distinctness that may display a higher level of skill and understanding of masonry.

Curves in brick walls may be accomplished with brick of standard dimensions or by cutting the average person brick units to support their placement in the curve, but brick may also be sourced using its own bend included in each unit to accomplish a predetermined radius once the wall is complete. To help make the right choice for the project, think about the following factors.

What’s the radius of the required curve?

If the curved wall would be to achieve significant amounts of direction change in a little horizontal span, using standard uncut brick can lead to a curve that are less smooth. This effect is lessened in an exceedingly broad facade where each brick need only be adjusted a little from flush to perform the required curve over a broad expanse of wall. Still, each unit will undoubtedly be sitting at a less-than-square position in accordance with the brick units beside it, or above and below it (based on the bond pattern). Cutting standard brick can resolve a few of the texture issues where units meet one another at head joints, however the face of every unit it’s still flat okay for broad facades with gentle radii, but not for small facades with tight curves. Cutting also includes increased labor cost.

What size of brick will undoubtedly be used?

If the curve is usually to be manufactured from cut or uncut standard brick, the problem of the flatness of every unit (and then the apparent angularity of the curve) is magnified in larger brick. Consequently, a much greater expanse of curved wall viewed from the greater distance will be necessary to deliver a smooth curved look, if thats what the designer is after, when brick of large dimensions are employed.

What orientation and bond pattern will undoubtedly be used?

It probably goes without saying, however when a solid wall curves horizontally, the horizontal dimension of the brick may be the key. If the brick is usually to be laid using its long dimension along (as in a soldier course), the flatness aftereffect of each brick face is reduced as the horizontal dimension is indeed much narrower in this orientation.

Know your numbers

The Brick Industry Association (BIA) has recently done a lot of the task for designers of curved brick walls using its Brick Brief on this issue. This publication advises designers on minimum radii for brick of varied sizes without cuts, the cut dimensions necessary to achieve particular radii with various sizes of brick, and much more. If youre designing and specifying for structures with curved brick walls or any brick walls, for example youll also desire to have a look at BIAs Technical Note 10: Dimensioning and Estimating Brick Masonry.

Read More

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker